|
The ESP32 is currently a very popular microcontroller in hobby electronics. By installing this firmware on ESP32, KidsScript and ESP32 will be able to communicate directly, and electronic programming on ESP32 will be possible using KidsScript code.  ESP32-DevKitC-32E and Arduino IDE This firmware is an ino file for Arduino IDE, and is used by writing it to ESP32 from Arduino IDE. How to install and use There is a detailed explanation in the app's help. Help > How to start hobby electronics > Let's prepare to use ESP32 Disclaimer The behavior of KidsScript and this firmware has been intended to work well, but it is not guaranteed to work completely. This site is not responsible for any kind of loss incurred to the user due to the usage of these. If you agree to the above, please press the download button. The only difference between versions 1.1 and 1.0 below is the device name that is visible to the app during communication. There is no difference in the firmware functionality. ⚫︎Firmware version 1.1 2025.8.25 This is the version that uses the individual Mac address (last 5 digits) as the advertising name from the ESP32 to KidsScript. This makes it possible to distinguish between the connection destinations when multiple people use multiple ESP32s at the same time. Required KidsScript app: version 2.2 or later  KidsScript_esp32_firmware_1_1.zip 11,373バイト [MD5] 72646a191ec14ccdee79ffee5a323ae6 ⚫︎Firmware version 1.0 2024.11.21 This is the version that the advertised name from ESP32 to KidsScript is a fixed as "ESP32". Required KidsScript app: version 2.0 or later KidsScript_esp32_firmware_1_0_1.zip 10,814 bytes [MD5] a2b59ee565942e4768a19ad24931ec25 When you press the download button, a zip file will be saved in your "Downloads" folder. Please unzip it and use it according to the help instructions. |